Lesson Plans & Class Activities
Mercator Projection
Mercator world map Nova et Aucta Orbis Terrae Descriptio ad Usum Navigatium Emendate (1569)
The Mercator projection is a cylindrical map projection presented by the Flemish geographer and cartographer Gerardus Mercator, in 1569. It became the standard map projection for nautical purposes because of its ability to represent lines of constant true bearing or true course, known as rhumb lines, as straight line segments. While the direction and shapes are accurate on a Mercator projection, it distorts the size.
Properties and historical details
Mercator's 1569 edition was a large planisphere measuring 202 by 124 cm, printed in eighteen separate sheets. As in all cylindrical projections, parallels and meridians
are straight and perpendicular to each other. In accomplishing this,
the unavoidable east-west stretching of the map, which increases as
distance away from the equator
increases, is accompanied by a corresponding north-south stretching, so
that at every point location, the east-west scale is the same as the
north-south scale, making the projection conformal. A Mercator map can never fully show the polar areas, since linear scale
becomes infinitely high at the poles. Being a conformal projection,
angles are preserved around all locations, however scale varies from
place to place, distorting the size of geographical objects. In
particular, areas closer to the poles are more affected, transmitting
an image of the geometry of the planet which is more distorted the
closer to the poles. At latitudes higher than 70° north or south, the
Mercator projection is practically unusable.
A star map with cylindrical projection similar to Mercator projection, from the book of the Xin Yi Xiang Fa Yao, published in 1092 by the Chinese scientist Su Song. [1][2]
All lines of constant bearing (rhumb lines or loxodromes
- those making constant angles with the meridians), are represented by
straight segments on a Mercator map. This is precisely the type of
route usually employed by ships at sea, where compasses are used to indicate geographical directions and to steer the ships. The two properties, conformality and straight rhumb lines,
make this projection uniquely suited to marine navigation: courses and
bearings are measured using wind-roses or protractors, and the
corresponding directions are easily transferred from point to point, on
the map, with the help of a parallel ruler or a pair of navigational squares.
The name and explanations given by Mercator to his world map (Nova et Aucta Orbis Terrae Descriptio ad Usum Navigatium Emendate:
"new and augmented description of Earth corrected for the use of
navigation") show that it was expressly conceived for the use of marine
navigation. Although the method of construction is not explained by the
author, Mercator probably used a graphical method, transferring some
rhumb lines previously plotted on a globe to a square graticule,
and then adjusting the spacing between parallels so that those lines
became straight, making the same angle with the meridians as in the
globe.
The development of the Mercator projection represented a major breakthrough in the nautical cartography of the 16th century.
However, it was much ahead of its time, since the old navigational and
surveying techniques were not compatible with its use in navigation.
Two main problems prevented its immediate application: the
impossibility of determining the longitude at sea with adequate
accuracy and the fact that magnetic directions, instead of geographical directions, were used in navigation. Only in the middle of the 18th century, after the marine chronometer was invented and the spatial distribution of magnetic declination was known, could the Mercator projection be fully adopted by navigators.
Several authors are associated with the development of Mercator projection:
- German Erhard Etzlaub
(c. 1460-1532), who had engraved miniature "compass maps" (about 10x8
cm) of Europe and parts of Africa, latitudes 67°-0°, to allow
adjustment of his portable pocket-size sundials, was for decades
declared to have designed "a projection identical to Mercator’s". This
has since proven to be an error, tracing back to doubtable research in
1917.
- Portuguese mathematician and cosmographer Pedro Nunes
(1502-1578), who first described the loxodrome and its use in marine
navigation, and suggested the construction of several large-scale
nautical charts in the cylindrical equidistant projection to represent
the world with minimum angle distortion (1537).
- English mathematician Edward Wright
(c. 1558-1615), who formalized the mathematics of Mercator projection
(1599), and published accurate tables for its construction (1599, 1610).
- English mathematicians Thomas Harriot (1560-1621) and Henry Bond
(c.1600-1678) who, independently (c. 1600 and 1645), associated the
Mercator projection with its modern logarithmic formula, later deduced
by calculus.
Mathematics of the projection
Relation between vertical position on the map (horizontal in the graph) and latitude (vertical in the graph).
The following equations determine the x and y coordinates of a point on a Mercator map from its latitude φ and longitude λ (with λ0 being the longitude in the center of map):
This is the inverse of the Gudermannian function:

This is the Gudermannian function:

The scale is proportional to the secant of the latitude φ, getting arbitrarily large near the poles, where φ = plus or minus 90°. Moreover, as seen from the formulas, the pole's y is plus or minus infinity.
Derivation of the projection
The Mercator projection is a cylindrical projection.
Assume a spherical Earth. (It is actually slightly flattened, but
for small-scale maps the difference is immaterial. For more precision,
interpose conformal latitude.) We seek a transform of longitude-latitude (λ,φ) to Cartesian (x,y) that is "a cylinder tangent to the equator" (i.e. x=λ) and conformal, so that:


From x = λ we get


giving


Thus y is a function only of φ with y' = secφ from which a table of integrals gives
.
It is convenient to map φ = 0 to y = 0, so take C = 0.
Uses
The above reprojected as sinusoidal
Like all map projections
that attempt to fit a curved surface onto a flat sheet, the shape of
the map is a distortion of the true layout of the Earth's surface. The
Mercator projection exaggerates the size of areas far from the equator. For example:
- Greenland is presented as being roughly as large as Africa, when in fact Africa's area is approximately 14 times that of Greenland.
- Alaska is presented as being similar or even slightly larger in size than Brazil, when Brazil's area is actually more than 5 times that of Alaska.
Although the Mercator projection is still in common use for
navigation, due to its unique properties, cartographers agree that it
is not suited to representing the entire world in publications or wall
maps due to its distortion of land area. Mercator himself used the
equal-area sinusoidal projection to show relative areas. As a result of these criticisms, modern atlases no longer use the Mercator projection for world maps or for areas distant from the equator, preferring other cylindrical projections, or forms of equal-area projection. The Mercator projection is still commonly used for areas near the equator, however, where distortion is minimal.
Arno Peters stirred controversy when he proposed what is known as the Gall-Peters projection, a slight modification of the Lambert Cylindrical Equal-Area projection, as the alternative to the Mercator. A 1989
resolution by seven North American geographical groups decried the use
of all rectangular-coordinate world maps, including the Mercator and
Gall-Peters.[3]
Google Maps
currently uses a Mercator projection for its map images. Despite its
relative scale distortions, the Mercator is well-suited as an
interactive world map that can be panned and zoomed seamlessly to local
maps. (Google Satellite Maps, on the other hand, used a plate carrée projection until 2005-07-22.)
The Google Maps maximum latitude φ occurs at +/- 85.05113 degrees when the Mercator y value = π. Or more precisely:

See also
External links
Notes
- ^ Needham, Volume 3, 227.
- ^ Needham, Volume 4, Part 3, 569.
- ^ American Cartographer. 1989. 16(3): 222-223.
References
- Snyder, John P. (1987). Map Projections - A Working Manual. U.S. Geological Survey Professional Paper 1395. United States Government Printing Office, Washington, D.C. This paper can be downloaded from USGS pages.
- Monmonier, Mark (2004). Rhumb Lines and Map Wars. Chicago: The University of Chicago Press.
- Needham, Joseph (1986). Science and Civilization in China: Volume 3; Mathematics and the Sciences of the Heavens and the Earth. Taipei: Caves Books Ltd.
- Needham, Joseph (1986). Science and Civilization in China: Volume 4, Physics and Physical Technology, Part 3, Civil Engineering and Nautics. Taipei: Caves Books Ltd.
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia Encyclopedia article "Mercator Projection"
|