| Experiments Home |
|
| Renewable Energy |
|
|
| Solar Electricity |
|
|
|
|
  |
 The Solar Car Book A complete kit for making a cool solar racecar. Everything is included: wheels, axles, motors, wires and a genuine one-volt solar cell. |
|
|
|
Solar Electricity Electricity can be generated from the Sun in several ways. Photovoltaics (PV) has been mainly developed for small and medium-sized applications, from the calculator powered by a single solar cell to the PV power plant. For large-scale generation, concentrating solar thermal power plants have been more common but new multi-megawatt PV plants have been built recently. Other solar electrical generation technologies are still at the experimental stage. Photovoltaics
A solar cell (or photovoltaic cell) is a device that converts light into direct current using the photoelectric effect. The first solar cell was constructed by Charles Fritts in 1883.[56] Although the prototype selenium cells converted less than 1% of incident light into electricity, both Ernst Werner von Siemens and James Clerk Maxwell recognized the importance of this discovery.[57] Following the fundamental work of Russell Ohl in the 1940s, researchers Gerald Pearson, Calvin Fuller and Daryl Chapin created the silicon solar cell in 1954.[58] These early solar cells cost 286 $/watt and reached efficiencies of 4.5-6%.[59] The earliest significant application of solar cells was as a back-up power source to the Vanguard I satellite,[60] which allowed the satellite to continue transmitting for over a year after its chemical battery was exhausted.[61] The successful operation of solar cells on this mission was duplicated in many other Soviet and American satellites, and by the late 1960s PV had become the established source of power for satellites.[62] Photovoltaics went on to play an essential part in the success of early commercial satellites such as Telstar and continue to remain vital to the telecommunications infrastructure today.[63] The high cost of solar cells limited terrestrial uses throughout the 1960s. This changed in the early 1970s when prices reached levels that made PV generation competitive in remote areas without grid access. Early terrestrial uses included powering telecommunication stations, off-shore oil rigs, navigational buoys, and railroad crossings.[64] These and other off-grid applications have proven very successful and accounted for over half of worldwide installed capacity until 2004.[36] 
The 1973 oil crisis stimulated a rapid rise in the production of PV during the 1970s and early 1980s.[65] Economies of scale which resulted from increasing production along with improvements in system performance brought the price of PV down from 100 $/watt in 1971 to 7 $/watt in 1985.[66] Steadily falling oil prices during the early 1980s led to a reduction in funding for photovoltaic R&D and a discontinuation of the tax credits associated with the Energy Tax Act of 1978. These factors moderated growth to approximately 15% per year from 1984 through 1996.[67] Since the mid-1990s, leadership in the PV sector has shifted from the U.S. to Japan and Germany. Between 1992 and 1994 Japan increased R&D funding, established net metering guidelines, and introduced a subsidy program to encourage the installation of residential PV systems.[68] As a result, PV installations in the country climbed from 31.2 MW in 1994 to 318 MW in 1999,[69] and worldwide production growth increased to 30% in the late 1990s.[70] In 1990 Germany introduced Feed-in Tariffs to support the development of renewable energy sources, but it was the revision of the tariff structure as part of the Renewable Energy Sources Act in 2000 that has made Germany the leading PV market worldwide. Installed PV capacity has risen from 100 MW in 2000 to approximately 4,150 MW at the end of 2007.[71][72] Since adopting a similar feed-in tariff structure in 2004, Spain has become the third largest PV market, while France, Italy, South Korea, and the U.S. have also seen rapid growth recently due to various incentive programs and local market conditions.[73] Concentrating solar power
Concentrated sunlight has been used to perform useful tasks since the time of ancient China. A legend claims Archimedes used polished shields to concentrate sunlight on the invading Roman fleet and repel them from Syracuse. In 1866, Auguste Mouchout used a parabolic trough to produce steam for the first solar steam engine,[74] and subsequent developments led to the use of concentrating solar-powered devices for irrigation, refrigeration and locomotion.[75] Concentrating Solar Power (CSP) systems use lenses or mirrors and tracking systems to focus a large area of sunlight into a small beam. The concentrated light is then used as a heat source for a conventional power plant. A wide range of concentrating technologies exist; the most developed are the solar trough, parabolic dish and solar power tower. These methods vary in the way they track the Sun and focus light. In all these systems a working fluid is heated by the concentrated sunlight, and is then used for power generation or energy storage.[76] 
A solar trough consists of a linear parabolic reflector that concentrates light onto a receiver positioned along the reflector's focal line. The reflector is made to follow the Sun during the daylight hours by tracking along a single axis. Trough systems are the most developed CSP technology. The SEGS plants in California and Acciona's Nevada Solar One near Boulder City, Nevada are representatives of this technology. A parabolic dish system consists of a stand-alone parabolic reflector that concentrates light onto a receiver positioned at the reflector's focal point. The reflector tracks the Sun along two axes. Parabolic dish systems give the highest efficiency among CSP technologies. The Big Dish in Canberra, Australia is a representative of this technology. A solar power tower consists of an array of tracking reflectors (heliostats) that concentrate light on a central receiver atop a tower. Power towers are less advanced than trough systems but offer higher efficiency and better energy storage capability. The Solar Two in Daggett, California and the Planta Solar 10 in Sanlucar la Mayor, Spain are representatives of this technology. For more information see the following links: Experimental solar powerA solar updraft tower (also known as a solar chimney or solar tower) consists of a large greenhouse that funnels into a central tower. As sunlight shines on the greenhouse, the air inside is heated and expands. The expanding air flows toward the central tower where a turbine converts the air flow into electricity. A 50 kW prototype was constructed in Ciudad Real, Spain and operated for eight years before decommissioning in 1989.[77] A solar pond is a pool of salt water (usually 1-2 m deep) that collects and stores solar energy. Solar ponds were first proposed by Dr. Rudolph Bloch in 1948 after he came across reports of a lake in Hungary in which the temperature increased with depth. This effect was due to salts in the lake's water, which created a "density gradient" that prevented convection currents. A prototype was constructed in 1958 on the shores of the Dead Sea near Jerusalem.[78] The pond consisted of layers of water that successively increased from a weak salt solution at the top to a high salt solution at the bottom. This solar pond was capable of producing temperatures of 90 °C in its bottom layer and had an estimated solar-to-electric efficiency of two percent. Thermoelectric devices convert a temperature difference between dissimilar materials into an electric current. First proposed as a method to store solare energy by solar pioneer Mouchout in the 1800s,[79] thermoelectrics reemerged in the Soviet Union during the 1930s. Under the direction of Soviet scientist Abram Ioffe a concentrating system was used to thermoelectricly generate power for a 1 hp engine.[80] Thermogenerators were later used in the US space program as an energy conversion technology for powering deep space missions such as Cassini, Galileo and Viking. Research in this area is focused on raising the efficiency of these devices from 7–8% to 15–20%.[81] A solar power satellite, or SPS or Powersat, as originally proposed would be a satellite built in high Earth orbit that uses microwave power transmission to beam solar power to a very large antenna on Earth. Advantages of placing the solar collectors in space include the unobstructed view of the Sun, unaffected by the day/night cycle, weather, or seasons. It is a renewable energy source, zero emission, and only generates waste as a product of manufacture and maintenance. However, the costs of construction and launch are very high, and SPS will not be able to compete with conventional sources (at current energy prices). NotesReferences
This article is licensed under the GNU Free Documentation License. It uses material from Wikipedia Encyclopedia article "Solar Energy" |
